BLOOM Sew Along - Week Nine - Block Nine!!

Well hello cute people!!

We are starting the third row of the 

BLOOM

quilt today:)

I'm really having fun with these templates...

CLICK HERE

if you want to sew along with us!

This are the prints from 

Calico Days 

that I've chosen for my 

appliqué shapes this week.

Here is my block nine.

I know I keep saying this...

 but every block is my favorite!

Todays Sew Simple Shapes are

 A-1   A-2   A-19   A-21 

  

This weeks cutting goes as follows...

From fabric and Pellon BOTH:

Cut 1 - 2" square for small circle

Cut 1 - 3" square for large circle

Cut 4 - 2 1/2" squares for hearts

Cut 4 - 3" squares for blades

From fabric only you need two pieces of 7" long

 prepared stem strips and one 9" background square.

1. Trace around the shapes onto your Pellon.

2. Sew on the lines and trim seam allowance.

Clip a little off the corners of the blades and the heart points. 

3. Clip the cleavage on each heart right to your stitching lines but into them.

4. Cut an "X" in the Pellon only, for turning.

Turn...shape and press your appliqués:)

Press your background in half 

both ways like this.

Pin or glue baste your stems across the center.

Measure 1 1/4" from the edge of your fabric when placing your blades.

Center the large circle...

and the small circle goes in the center of that:)

Measure 2 1/4" from the background corner 

and the cleavage in each heart.

After basting...it's time to appliqué!

Add your border strips and squares

 and then take a photo:)

Use the hashtag

#BloomBlockNine

and smile when you show it off on 

Instagram!

Don't forget to 

check out my little dresden tutorial 

using one of my BLOOM shapes.

CLICK HERE

just in case you missed it...

it's super fun!

xx

Lori

Dresden Plate Tutorial using Sew Simple Shapes

I love dresden blocks and if you do too...

 I'm going to show you something fun!

When I designed my BLOOM set of 

Sew Simple Shapes 

I made sure to design several of the shapes to do double duty.

Let me explain.

When appliquéing, this A-20 shape can easily be used for 

flower petals or a small vase etc.

But today I'm using it to make a cute little dresden plate:)

I used my 2 1/2" strips of Calico Days fabric and cut off a 

2" section from each strip.

In other words...

for one dresden blade you need

 a piece 2" wide x 2 1/2" tall.

The A-20 shape is 2 1/2" tall so just lay it on top...

 and trace down the two sides like this.

PS. There are 2 more fabrics under the yellow one...

I just trace the top piece but cut three at a time.

After tracing...I just lay my 2 1/2" square ruler on the lines and cut.

Using the pink rotating mat for this step really helps.

I just discard the 2 outside leftovers.

See? Now I have three A- 20 shapes cut already.

I just continued...

Until I had a bunch of them cut.

You will just need 18 shapes for one dresden.

I laid 18 out on my design board in the order that I liked and snapped a pic on my iPhone for future reference in case they got mixed up when sewing them together.

I sewed them in pairs and chain pieced

 to save thread and time and keep them in order.

Then laid them back out on my design board again...

After pressing the seams open.

Then I sewed the pairs together into sections of 4 with a two section leftover.

I just keep sewing until all sections are sewn together...

With seams pressed open.

It's important to use an accurate 1/4" seam allowance so that it lies flat...

BUT...if it doesn't...no worries!!!

You can easily take a few tiny bit larger seams on a few of the blades 

until it lies flat.

This one turned out perfectly flat so I didn't have to...

but I have done it before when needed:)

Okay...now to prepare those outside raw edges for appliqué!

I use my 6" finished Circle Ruler.

Click Here 

to get just this size...

or

Click Here 

to get the set of four different sizes.

I laid the ruler on the back of my dresden and used 

the lines on the ruler to 

line up with seams to get it centered.

Then I traced around the circle....

Like this.

Your line should be 1/2" in from the edge.

Now cut a piece of Pellon 7" square.

Make sure it is the lightweight Sew-In kind 

that we are using for the 

BLOOM Sew Along

Lay your dresden right side down on the Pellon and pin.

Sew directly onto the line and backstitch when you start and stop...

or overstitch about 1/2" to secure for turning right side out.

When you stitch...keep this side up so that all of the seams remain open.

Now trim approximately 1/4" past your stitching line.

Now you can carefully turn right side out 

through the center hole...

Easy Peasy!!

This is what it looks like before pressing...

Use your Clover turning tool if you need

 to gently push out the curves on the outside.

Nice and flat!

Remember to PRESS not iron.

You don't want to distort the shape:)

Now for the center circle:)

Grab your A-2 Sew Simple Shape!

Cut a 3" square out of BOTH fabric and Pellon.

Trace A-2 onto the Pellon.

And sew them together on the traced lines and trim.

Cut an "X" in the back of the Pellon only for turning.

Turn right side out and press.

Now you have a cute center circle!

Place it right in the center of the dresden by measuring

 1 3/4" from the edges of the blades:)

Pin it into place and appliqué by machine or by hand...your choice!

This 6" dresden would look great on a 8" finished background square.

I'll be showing you another dresden with pointed ends next week.

I'm not showing you how I've finished these yet 

because it is part of one of the surprise projects that we will be 

doing in my Calico Days retreat/workshop the last week in April!

If you want to come and sew with me in beautiful Utah...

CLICK HERE 

to register.

I have lots of fun things planned!

See you on Monday for block nine of the

 BLOOM Sew Along:)

xx

Lori